3FTech Vertical Foregrip Series V1.1.1
about
3FTech Vertical Foregrip V1.1.1: FFFTech/FFFTechnology
A series of full length vertical foregrips. The Basic model is designed to be easily modified
in CAD software for different textures to suit the end user's preferred grip feel.
Five separate models have been created:
*Basic
*Minimal
*Checkered
*Ridged
*Mark of the Heretic
Update V1.1.1: Enlarged picatinny rail channel for better fitment, changed print settings for the
common used Ender 3 3D printers.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm+
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%+
Print the foregrip upside-down, with support material only for the picatinny slot.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
Accreditation:
Credit goes to AWCY?, GunCAD Development Team. Creators of the DanStipple/FedStipple, the texture on the Mark of the Heretic model.
files
| File | Extension |
|---|---|
| Laffs VFG V1.1.4.zip | zip |
versions
Version: Laffs Vertical Foregrip V1.1.4 latest
Laffs Vertical Foregrip V1.1.4: Laffs Dynamics
A series of full length vertical foregrips.
Five separate models have been created:
*Basic
*Minimal
*Checkered
*Ridged
*Mark of the Heretic
Update V1.1.4: Redesignated from 3FTech VFG to Laffs VFG. Removed non-applicable text for current version.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm+
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 25%
Support Material Percentage: 20%+
Print the foregrip upside-down, with support material only for the picatinny slot.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
Accreditation:
AWCY?, GunCAD Development Team. Creators of the DanStipple/FedStipple, the texture on the Mark of the Heretic model.
Version: 1.0.0
about
3FTech Vertical Foregrip V1.1.1: FFFTech/FFFTechnology
A series of full length vertical foregrips. The Basic model is designed to be easily modified
in CAD software for different textures to suit the end user's preferred grip feel.
Five separate models have been created:
*Basic
*Minimal
*Checkered
*Ridged
*Mark of the Heretic
Update V1.1.1: Enlarged picatinny rail channel for better fitment, changed print settings for the
common used Ender 3 3D printers.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm+
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%+
Print the foregrip upside-down, with support material only for the picatinny slot.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
Accreditation:
Credit goes to AWCY?, GunCAD Development Team. Creators of the DanStipple/FedStipple, the texture on the Mark of the Heretic model.
creator
Metrics
Views
8.2K
files
| File | Extension |
|---|---|
| Laffs VFG V1.1.4.zip | zip |
versions
Version: Laffs Vertical Foregrip V1.1.4 latest
Laffs Vertical Foregrip V1.1.4: Laffs Dynamics
A series of full length vertical foregrips.
Five separate models have been created:
*Basic
*Minimal
*Checkered
*Ridged
*Mark of the Heretic
Update V1.1.4: Redesignated from 3FTech VFG to Laffs VFG. Removed non-applicable text for current version.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm+
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 25%
Support Material Percentage: 20%+
Print the foregrip upside-down, with support material only for the picatinny slot.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
Accreditation:
AWCY?, GunCAD Development Team. Creators of the DanStipple/FedStipple, the texture on the Mark of the Heretic model.
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
