Sphynx 92 series
A 3dprinted Beretta 92/M9 series frame

Author
gerald.katz
credits to:
    mountainman1776 for grip files
    tjb556 for sanity checking my life
    Dr._Death for testing
    defaultt for testing
    TM18271998 for testing, Read-me proofreading, and variant research
    kc1984 for vertec grip files and main spring cap files.

Description
This is a fully 3dprinted Beretta 92/m9 frame that supports a variety of 90 series models.

Materials Required

- x1 **Parts Kit** - This design uses 100% Beretta parts below is a list of some of the parts kits that are compatible
    92FS
    92F
    92S
    92SB
    92 Type M
    92D
    92G
    92 Centurion
    92 Brigadier **(from research not real life testing)**
    92 Compact (on compact frame and full size)
    92a1
    90-2
    96 and 98 variants of the above models
    Helwan 920 clone  (with slight fitting)
    Girsan (with slight fitting on barrel rails)
    Potentially more...
    
    Taurus parts are not compatible at this time.
    Any kit with a frame safety is also not compatible.
    **92S kits do not have the firing pin block / trigger safety and cause the safety decocker to wiggle side to side. It does not affect function at all but may cause uneven wear.**
            
    - **Full parts list (92FS)**
        x1 Slide assembly (Slide, firing pin, firing pin spring, firing pin block/spring, etc)
        x1 Barrel assembly (Barrel, Locking block, LB pin, LB roll pin)
        x1 Take-down lever
        x1 Take-down lever button
        x1 Take-down lever button and spring
        x1 Trigger
        x1 Trigger spring
        x1 Trigger pin
        x1 Trigger bar
        x1 Slide catch
        x1 Slide catch spring
        x1 Trigger bar tension spring
        x1 Sear*
        x1 Sear spring*
        x1 Sear pin*
        x1 Hammer
        x1 Hammer strut
        x1 Hammer spring
        x1 Hammer pin
        x1 Hammer spring cap
        x1 Hammer spring cap roll pin / dogbone solid pin / 90-2 oval pin
        x1 Decocker
        x1 Decocker/Ejector Pin (solid pin with head)
        x1 Ejector roll pin
        x1 Left grip panel
        x1 Right grip panel
            Or printed grips
        x4 Grip screws (M3 Screws can work as a replacement)
        
        *92D models are missing their sear and sear pin due to being DAO. You can replace the hammer and install a sear, but you wont have a manual safety.