Chonk AKM Grip: FFFTech/FFFTechnology
This bad boi be the thiCCness, the honken chonken, a chubbers!
OEM AKM grips are usually 21mm thick, but that hefty hunk is 24.2mm thiCC across the entire grip width!
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 215C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
File | Extension |
---|---|
Chonk AKM Grip.zip | zip |
Version: 1.0.0 latest
Chonk AKM Grip: FFFTech/FFFTechnology
This bad boi be the thiCCness, the honken chonken, a chubbers!
OEM AKM grips are usually 21mm thick, but that hefty hunk is 24.2mm thiCC across the entire grip width!
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 215C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
1.3K
Feb 04, 2022
3D Printer
United States
English
QmQXTguJuwwAiv6FjWLA5XqAsdVKjdHRv1banCtM1JTbc6
File | Extension |
---|---|
Chonk AKM Grip.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.