PUG'S - printed AR15 takedown pins
about
printed ar15 takedown pins, these require a m3x30mm screw and nut for rear pin and m3x35 screw and nut for front pin.
print orientation is pre determined as the screws are reinforcements for longevity.
print settings: nozzle 220, bed 60, wall count 5, infill 100%, supports on, pva gluestick for bed adhesion.
files
| File | Extension |
|---|---|
| stl/rear takedown pin.stl | stl |
| stl/rear takedown nut.stl | stl |
| stl/front takedown pin.stl | stl |
| stl/front takedown nut.stl | stl |
| step/ar15 takedown pins v3.step | step |
| readme.txt | txt |
versions
Version: 1.0.0 latest
initial upload
about
printed ar15 takedown pins, these require a m3x30mm screw and nut for rear pin and m3x35 screw and nut for front pin.
print orientation is pre determined as the screws are reinforcements for longevity.
print settings: nozzle 220, bed 60, wall count 5, infill 100%, supports on, pva gluestick for bed adhesion.
creator
Metrics
Views
1K
Downloads
267
Project Info
release date
Aug 30, 2024
artifact types
CAD Object, Stereolithic object
library category
fabrication method
release country
United States
language
English
license
No license
files
| File | Extension |
|---|---|
| stl/rear takedown pin.stl | stl |
| stl/rear takedown nut.stl | stl |
| stl/front takedown pin.stl | stl |
| stl/front takedown nut.stl | stl |
| step/ar15 takedown pins v3.step | step |
| readme.txt | txt |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
