"Heavy Handed" Knuckleduster: FFFTech/FFFTechnology
A knuckleduster with a standard styled outline, but with a taper of 4.5°, having the knuckles of the design be wider than it's palm rest.
The knuckles make more surface contact with flesh, compared to more conventional designs.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill Pattern: Gyroid
Material Flow: 100%
Note: This is a paperweight.