A 3DP compact push dagger with a widened spear point to resist tip breakage. The tip is thicker than the previous
Laffs Dynamics released push dagger. Features a wide blade, with a ridged grip.
Print Settings:
File | Extension |
---|---|
Revolt Push Dagger V1.0.2.zip | zip |
Version: "Revolt" Push Dagger V1.0.2 latest
"Revolt" Push Dagger V1.0.2: Laffs Dynamics
A 3DP compact push dagger with a widened spear point to resist tip breakage. The tip is thicker than the previous
Laffs Dynamics released push dagger. Features a wide blade, with a ridged grip.
Update V1.0.2: Removed unintended negative space artifacting within STL model.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%
Version: "Revolt" Push Dagger V1.0.1
"Revolt" Push Dagger V1.0.1: Laffs Dynamics
A 3DP compact push dagger with a widened spear point to resist tip breakage. The tip is thicker than the previous Laffs Dynamics released push dagger. Features a wide blade, with a ridged grip.
Update V1.0.1: Changed recommended print settings for better device strength, updated name of designer.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%
Version: 1.0.0
A 3DP compact push dagger with a widened spear point to resist tip breakage. The tip is thicker than the previous
Laffs Dynamics released push dagger. Features a wide blade, with a ridged grip.
Print Settings:
11.1K
Aug 24, 2023
United States
English
File | Extension |
---|---|
Revolt Push Dagger V1.0.2.zip | zip |
Version: "Revolt" Push Dagger V1.0.2 latest
"Revolt" Push Dagger V1.0.2: Laffs Dynamics
A 3DP compact push dagger with a widened spear point to resist tip breakage. The tip is thicker than the previous
Laffs Dynamics released push dagger. Features a wide blade, with a ridged grip.
Update V1.0.2: Removed unintended negative space artifacting within STL model.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%
Version: "Revolt" Push Dagger V1.0.1
"Revolt" Push Dagger V1.0.1: Laffs Dynamics
A 3DP compact push dagger with a widened spear point to resist tip breakage. The tip is thicker than the previous Laffs Dynamics released push dagger. Features a wide blade, with a ridged grip.
Update V1.0.1: Changed recommended print settings for better device strength, updated name of designer.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.