Balance Grips by FFFTech/FFFTechnology
A basic set of slim grips for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable grip, whether prone or offhand shooting. Two designs are available, a standard smooth grip, and a ridge textured grip.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
First Layer Print Height: .22mm
Standard Layer Height: .18mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 20% - 32%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 10% (Supports only needed for the bottom part of the grip that raises from the print bed)
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent
1x Safety Selector Detent Spring