A2 Stock with Spring Latches
about
uses a 6mm spring or 1/4 in, 50mm or 2in long mcmastercarr 9657K383
2x short sections of paperclip to retain the spring assembly
2x 91290A171 m3 bolts
To assemble put the bolts in the sleeves and drop it all into the buttpad then press them below flush and cross pin with the paperclip
you can adjust the latch sickout by turning the screws
May want to round the bolt tips with a file
Credit
Unseenkiller
files
| File | Extension |
|---|---|
| Unseenkiller - A2 with spring latches_.step | step |
versions
Version: 1.0.0 latest
initial upload
about
uses a 6mm spring or 1/4 in, 50mm or 2in long mcmastercarr 9657K383
2x short sections of paperclip to retain the spring assembly
2x 91290A171 m3 bolts
To assemble put the bolts in the sleeves and drop it all into the buttpad then press them below flush and cross pin with the paperclip
you can adjust the latch sickout by turning the screws
May want to round the bolt tips with a file
Credit
Unseenkiller
creator
Metrics
Views
813
Downloads
158
Project Info
mod parent
Unseenkiller - A2 Multi Position-Mounted Fixed Stock (v1.1)
release date
Oct 31, 2024
artifact type
library category
fabrication method
release country
United States
language
English
license
No license
files
| File | Extension |
|---|---|
| Unseenkiller - A2 with spring latches_.step | step |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
