Mo' Paws| Mo' Claws Knuckleduster
about
Mo' Paws, Mo' Claws Knuckleduster: FFFTech/FFFTechnology
A solid, thinner version of the orginal 3FTech Paw Claws Knuckleduster. Knuckles are extended by 3mm.
Palm section has ridges down the spine, and divots on each side of the knuckleduster.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm+
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Note: This is a paperweight.
files
| File | Extension |
|---|---|
| Mo' Paws, Mo' Claws Knuckleduster.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Mo' Paws, Mo' Claws Knuckleduster: FFFTech/FFFTechnology
A solid, thinner version of the orginal 3FTech Paw Claws Knuckleduster. Knuckles are extended by 3mm.
Palm section has ridges down the spine, and divots on each side of the knuckleduster.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm+
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Note: This is a paperweight.
creator
Metrics
Views
3.6K
Downloads
412
Project Info
release date
Jun 02, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
version hash
Qmaf6WwRKNWgvggJcsbGpEiLWAUMVt9TEnxdsFfNSH5J5g
files
| File | Extension |
|---|---|
| Mo' Paws, Mo' Claws Knuckleduster.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
