7.62x39 Ammo Storage Boxes
about
7.62x39 Ammo Storage Boxes: FFFTech/FFFTechnology
Boxes for storing 7.62x39 cartridges. Often the ammunition is packed in 20rd cheap cardboard, and when filling a standard 30rd AK magazine, the 2nd box is left with 10rds. Better to store them in a dedicated casing, rather than left in the easily ripped cardboard boxes.
Or if you're an absolute nutter and... reload ammo for the AK platform (A sign of insanity) these storage boxes are of good use.
Two variants are available:
*10rd
*20rd
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 56C
- First Layer Print Height: .2mm
- Standard Layer Height: .16mm+
- Wall Thickness: .40
- Wall Perimeters: 3+
- Infill: 20%
- Infill Pattern: Gyroid
- Material Flow: 100%
- Support Material Percentage: 20%
files
| File | Extension |
|---|---|
| 7.62x39 Ammo Boxes.zip | zip |
versions
Version: 7.62x39 Ammo Storage Boxes latest
7.62x39 Ammo Storage Boxes: Laffs Dynamics
Boxes for storing 7.62x39 cartridges. Often the ammunition is packed in 20rd cheap cardboard, and when filling a
standard 30rd AK magazine, the 2nd box is left with 10rds. Better to store them in a dedicated casing, rather than
left in the easily ripped cardboard boxes.
Or if you're an absolute nutter and... reload ammo for the AK platform (A sign of insanity) these storage boxes are
of good use.
Two variants are available:
*10rd
*20rd
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm+
Wall Thickness: .40
Wall Perimeters: 3+
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Version: 1.0.0
Initial release
about
7.62x39 Ammo Storage Boxes: FFFTech/FFFTechnology
Boxes for storing 7.62x39 cartridges. Often the ammunition is packed in 20rd cheap cardboard, and when filling a standard 30rd AK magazine, the 2nd box is left with 10rds. Better to store them in a dedicated casing, rather than left in the easily ripped cardboard boxes.
Or if you're an absolute nutter and... reload ammo for the AK platform (A sign of insanity) these storage boxes are of good use.
Two variants are available:
*10rd
*20rd
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 56C
- First Layer Print Height: .2mm
- Standard Layer Height: .16mm+
- Wall Thickness: .40
- Wall Perimeters: 3+
- Infill: 20%
- Infill Pattern: Gyroid
- Material Flow: 100%
- Support Material Percentage: 20%
creator
Metrics
Views
4.4K
Project Info
release date
Aug 12, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| 7.62x39 Ammo Boxes.zip | zip |
versions
Version: 7.62x39 Ammo Storage Boxes latest
7.62x39 Ammo Storage Boxes: Laffs Dynamics
Boxes for storing 7.62x39 cartridges. Often the ammunition is packed in 20rd cheap cardboard, and when filling a
standard 30rd AK magazine, the 2nd box is left with 10rds. Better to store them in a dedicated casing, rather than
left in the easily ripped cardboard boxes.
Or if you're an absolute nutter and... reload ammo for the AK platform (A sign of insanity) these storage boxes are
of good use.
Two variants are available:
*10rd
*20rd
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm+
Wall Thickness: .40
Wall Perimeters: 3+
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
