Author: nameisnight

Details:
    A modular 22lr suppressor. As with all my works SolidWorks CAD files are included for editing.
    
Print Settings:
    PLA+
    0.16mm
    3+ Walls
   Dense Infill
    PRINT SLOW FOR THREADS!

Parts Needed
        M5 Threaded Rod
        2 M5 Nuts
    
Build Instructions
    Print all parts and ans many Baffles as you wish to use.
    Clean parts of any supports and check for under extrusion.
    Stack together with Expantion chamber of choice followed by selected amount of baffles then the select end cap.
    Take M5 threaded rod and messure how long you will need it from the expantion chamber to end cap and then cut it.
    Thread the rod through the suppressor and use M5 nuts to tighten into place. DO NOT OVER TIGHTEN OR YOU MAY DAMAGE THE PARTS
    
The 1022 moddel will also need M3 bolts for attaching to the barrel of a 10/22.