Creator: 0pf0rarmory

I finally made something useful. Feel free to improve on this design. Credit to Invizi and RiceCutta for the OG files I based this off of.

I made this simple remix in Prusa slicer using Invizi’s dust cover and RiceCutta’s MONS Optic riser. 

I recommend using Pursa’s Add negative Volume > cylinder and align it with the front holes in the cover. Or you could just be a mad lad and drill holes in the cover for the optic screws. 

I also included Invzi’s dust cover retaining pin. i recommend sizing it to your print until you get a snug fit on the dust cover to the frame. Or you can just print a pin and plastic weld it to the cover once you have it installed. Either way its not going anywhere. 

This is a terrible description but if y’all are printing recession rugers im sure y’all can figure out how this riser works. I printed this with the railed side down as it would sit on the recession ruger.