Razor Blade Brace (AR-15)
about
Razor Blade Brace (AR-15): Laffs Dynamics
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
files
| File | Extension |
|---|---|
| Razor Blade Brace V1.0.1.zip | zip |
| 86401605-775e-4e10-b180-71edc4795df2.zip | zip |
versions
Version: Razor Blade Brace V1.0.1 latest
Razor Blade Brace V1.0.1: Laffs Dynamics
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Update V1.0.1: Added forgotten support material percentage print setting.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 18%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
Version: 1.0.0
Initial release
about
Razor Blade Brace (AR-15): Laffs Dynamics
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
creator
Metrics
Views
2K
Downloads
282
Project Info
release date
Jan 13, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| Razor Blade Brace V1.0.1.zip | zip |
| 86401605-775e-4e10-b180-71edc4795df2.zip | zip |
versions
Version: Razor Blade Brace V1.0.1 latest
Razor Blade Brace V1.0.1: Laffs Dynamics
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Update V1.0.1: Added forgotten support material percentage print setting.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 18%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
