Walther P22 Mag
about
The Snarks Walther P22 Magazine.
Really not a lot to say about this one.
I got a new to me Walther P22, and I really love the damn thing. However, when I went to go buy an
extra magazine for it, the cheapest one I could find was $39.95, (I'm seeing that you can get them as low
as about $30 on eBay right now.) But I’ve got a 3D printer and a pair of calipers, and I’ve seen people do
CAD stuff before.
I had extra magazine springs from another project that worked out really well. I bought them from this
place. https://www.blackdogmachinellc.net/ciener-replacement-recoil-spring.aspx
I cut mine so that about four coils were hanging out of the end of the magazine, you may be able to use
a little bit less spring, I didn’t really put a lot of thought into it. I’m pretty sure the original only had three
coils hanging out the end. Anyway, if you buy those long springs I linked up there you can almost get
three mags worth out of one spring, which works out to like $0.50 per mag.
“Good luck, be safe, keep hope, and have fun” – The Snark
files
| File | Extension |
|---|---|
| Walther P22 Mag.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
The Snarks Walther P22 Magazine.
Really not a lot to say about this one.
I got a new to me Walther P22, and I really love the damn thing. However, when I went to go buy an
extra magazine for it, the cheapest one I could find was $39.95, (I'm seeing that you can get them as low
as about $30 on eBay right now.) But I’ve got a 3D printer and a pair of calipers, and I’ve seen people do
CAD stuff before.
I had extra magazine springs from another project that worked out really well. I bought them from this
place. https://www.blackdogmachinellc.net/ciener-replacement-recoil-spring.aspx
I cut mine so that about four coils were hanging out of the end of the magazine, you may be able to use
a little bit less spring, I didn’t really put a lot of thought into it. I’m pretty sure the original only had three
coils hanging out the end. Anyway, if you buy those long springs I linked up there you can almost get
three mags worth out of one spring, which works out to like $0.50 per mag.
“Good luck, be safe, keep hope, and have fun” – The Snark
creator
Metrics
Views
331
Downloads
185
Project Info
release date
Dec 27, 2023
artifact type
Printable project
library category
Printable Magazines
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
No license
Firearm Info
type
Pistol
platform
Walther P22
caliber
.22LR
part
Magazine
files
| File | Extension |
|---|---|
| Walther P22 Mag.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
