Belgian Waffle D.R.U.M. Mag Cover
about
Belgian Waffle D.R.U.M. Mag Cover: Laffs Dynamics
Oh lawdy we made too much waffle batter! Ain't nobody gonna want ANOTHER syrup boi!
Well we ain't gonna eat it, might as well make it into a drum mag cover.
Cover for the DMB Co. D.R.U.M. Magazine, in the shape of a belgian waffle.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 38%+
Support Material Percentage: 20%
Print the cover on it front face.
Notes:
1) This data pack is just for printing the cover. To get the base magazine data pack, use the following link: (https://odysee.com/@AreWeCoolYet:7/DannysDrumMags)
2) I know you dumb dumbs aren't gonna read this doc, but I feel it's important to remind you not to eat this design after its been printed.
Accreditations:
Danny Meatball: Creator of the DMB Co. D.R.U.M. Magazine. Used the base model of his mag's front cover for this design.
files
| File | Extension |
|---|---|
| Belgian Waffle D.R.U.M. Mag Cover V1.1.zip | zip |
| 8f95ee16-6fd1-475f-924d-9d04a285695b.zip | zip |
versions
Version: Belgian Waffle D.R.U.M. Mag Cover V1.1 latest
Belgian Waffle D.R.U.M. Mag Cover V1.1: Laffs Dynamics
Oh lawdy we made too much waffle batter! Ain't nobody gonna want ANOTHER syrup boi!
Well we ain't gonna eat it, might as well make it into a drum mag cover.
Cover for the DMB Co. D.R.U.M. Magazine, in the shape of a belgian waffle.
Update V1.1: Added 2022 Laffs logo.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 38%+
Support Material Percentage: 20%
Print the cover on it front face.
Notes:
1) This data pack is just for printing the cover. To get the base magazine data pack, use the following link: (https://odysee.com/@AreWeCoolYet:7/DannysDrumMags)
2) I know you dumb dumbs aren't gonna read this doc, but I feel it's important to remind you not to eat this design after its been printed.
Accreditations:
Danny Meatball: Creator of the DMB Co. D.R.U.M. Magazine. Used the base model of his mag's front cover for this design.
Version: 1.0.0
Initial release
about
Belgian Waffle D.R.U.M. Mag Cover: Laffs Dynamics
Oh lawdy we made too much waffle batter! Ain't nobody gonna want ANOTHER syrup boi!
Well we ain't gonna eat it, might as well make it into a drum mag cover.
Cover for the DMB Co. D.R.U.M. Magazine, in the shape of a belgian waffle.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 38%+
Support Material Percentage: 20%
Print the cover on it front face.
Notes:
1) This data pack is just for printing the cover. To get the base magazine data pack, use the following link: (https://odysee.com/@AreWeCoolYet:7/DannysDrumMags)
2) I know you dumb dumbs aren't gonna read this doc, but I feel it's important to remind you not to eat this design after its been printed.
Accreditations:
Danny Meatball: Creator of the DMB Co. D.R.U.M. Magazine. Used the base model of his mag's front cover for this design.
creator
Metrics
Views
3.9K
Downloads
264
Project Info
release date
Feb 01, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| Belgian Waffle D.R.U.M. Mag Cover V1.1.zip | zip |
| 8f95ee16-6fd1-475f-924d-9d04a285695b.zip | zip |
versions
Version: Belgian Waffle D.R.U.M. Mag Cover V1.1 latest
Belgian Waffle D.R.U.M. Mag Cover V1.1: Laffs Dynamics
Oh lawdy we made too much waffle batter! Ain't nobody gonna want ANOTHER syrup boi!
Well we ain't gonna eat it, might as well make it into a drum mag cover.
Cover for the DMB Co. D.R.U.M. Magazine, in the shape of a belgian waffle.
Update V1.1: Added 2022 Laffs logo.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 38%+
Support Material Percentage: 20%
Print the cover on it front face.
Notes:
1) This data pack is just for printing the cover. To get the base magazine data pack, use the following link: (https://odysee.com/@AreWeCoolYet:7/DannysDrumMags)
2) I know you dumb dumbs aren't gonna read this doc, but I feel it's important to remind you not to eat this design after its been printed.
Accreditations:
Danny Meatball: Creator of the DMB Co. D.R.U.M. Magazine. Used the base model of his mag's front cover for this design.
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
