FTN.3 EZ Suppressor Pack
about
Basically the FTN.3 but in an easy to print polygon shape, and also easy to wrap JB fiberweld. No need for any resin mixing.
by pla.boi
-------------------------------------------------------------
Description:
This is a printed suppressor capable of supersonic rifle calibers. This uses the same slanted K baffles as the regular FTN.3. Please see assembly PDF for more details.
Rated for 556, 300 BO, 9mm. The standard size is also rated for 308. The K can has not been tested in 308.
The core idea behind all of the FTN series is that a horizontally printed suppressor is strong axially, and weak hoop strength. However hoop strength is very easy to reinforce.
Heat is handled by the K baffles, as there is a lot of support at the bore. When the PLA softens from heat, there is bidirectional support so the blast does not cause deformation.
Unlike the original FTN.3 release, this EZ version is designed to be easy to print due to polygon shape and easy to assemble
-------------------------------------------------------------
Variants:
-Standard model (13 oz, larger volume, better signature reduction)
-K can (10 oz, shorter, more maneuverable)
-------------------------------------------------------------
Materials Required:
-Quality PLA+
-JB Weld Fiberweld (60 inches) - you may use two if you want extra reinforcement
-1/2x28 to 3/4x16 thread adapter or 5/8x24 to 3/4x16 thread adapter
-washer/machine bushing for Form 1 (see build documentation PDF for sizing)
-epoxy resin
-------------------------------------------------------------
Instructions: See the build PDF for details and picture. Read the PDF's carefully and take your time with the build. This is not something to rush through.
-Print suppressor (220 hotend, 60 bed, .15 layer height, 8 walls, 100% concentric infill, no supports, brim)
-epoxy in thread adapter
-wrap in JB weld Fiberweld
-------------------------------------------------------------
##Change Log
-v1.0: Version 1 Release
-------------------------------------------------------------
files
| File | Extension |
|---|---|
| FTN.3 EZ Suppressor Pack.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Basically the FTN.3 but in an easy to print polygon shape, and also easy to wrap JB fiberweld. No need for any resin mixing.
by pla.boi
-------------------------------------------------------------
Description:
This is a printed suppressor capable of supersonic rifle calibers. This uses the same slanted K baffles as the regular FTN.3. Please see assembly PDF for more details.
Rated for 556, 300 BO, 9mm. The standard size is also rated for 308. The K can has not been tested in 308.
The core idea behind all of the FTN series is that a horizontally printed suppressor is strong axially, and weak hoop strength. However hoop strength is very easy to reinforce.
Heat is handled by the K baffles, as there is a lot of support at the bore. When the PLA softens from heat, there is bidirectional support so the blast does not cause deformation.
Unlike the original FTN.3 release, this EZ version is designed to be easy to print due to polygon shape and easy to assemble
-------------------------------------------------------------
Variants:
-Standard model (13 oz, larger volume, better signature reduction)
-K can (10 oz, shorter, more maneuverable)
-------------------------------------------------------------
Materials Required:
-Quality PLA+
-JB Weld Fiberweld (60 inches) - you may use two if you want extra reinforcement
-1/2x28 to 3/4x16 thread adapter or 5/8x24 to 3/4x16 thread adapter
-washer/machine bushing for Form 1 (see build documentation PDF for sizing)
-epoxy resin
-------------------------------------------------------------
Instructions: See the build PDF for details and picture. Read the PDF's carefully and take your time with the build. This is not something to rush through.
-Print suppressor (220 hotend, 60 bed, .15 layer height, 8 walls, 100% concentric infill, no supports, brim)
-epoxy in thread adapter
-wrap in JB weld Fiberweld
-------------------------------------------------------------
##Change Log
-v1.0: Version 1 Release
-------------------------------------------------------------
creator
Metrics
Views
2.9K
Downloads
247
Project Info
release date
Feb 24, 2024
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| FTN.3 EZ Suppressor Pack.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
