7.62x39 Snap Cap
about
7.62x39 Snap Cap: FFFTech/FFFTechnology
3D printed snap cap, dimensions of a 7.62x39 cartridge.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .1mm - .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%+
Infill Pattern: Gyroid
Material Flow: 100%
(Highly advisable to print 3+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
files
| File | Extension |
|---|---|
| 7.62x39 Snap Cap.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
7.62x39 Snap Cap: FFFTech/FFFTechnology
3D printed snap cap, dimensions of a 7.62x39 cartridge.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .1mm - .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%+
Infill Pattern: Gyroid
Material Flow: 100%
(Highly advisable to print 3+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
creator
Metrics
Views
3K
Project Info
release date
May 15, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
version hash
QmVwDexh9kGDkeXs55A2pcfBymtPhAgxSuWTwEk7oMhmT3
files
| File | Extension |
|---|---|
| 7.62x39 Snap Cap.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
