Romulan Charger .22 caliber Pistol

What is the Romulan Charger?

The Romulan Charger is a 3d printed pistol that uses A Ruger 10-22 bolt and charging handle along with the components from a 10-22 trigger pack. A 10-22 or Charger barrel can be used if of proper length.

The Romulan Charger was inspired from the TV Series Star Trek Picard. Peyton List wielded the Romulan Disrupter in several episodes. I used screen captures from the show as a reference to model from.

If you want to make your own barrel use v0.3.

10-22 barrel and barrrel clamp block was sourced from det_disp.
All hardware was sourced from Mcmaster Carr.
Bolt and Trigger pack were sourced from the internet.

The receiver, FCG housing and forend are 3d printed. PLA+ from eSun works well.

See PDF's for BOM and for custom barrel dimensions.

• V0.1 first test cracked receiver at buffer pin
• V0.2 reinforced rear receiver at buffer pin
• V0.3 reduced size of magazine pocket (v0.3 uses custom barrel)
• v0.4 changed receiver and current barrel clamp to accommodate 10-22 standard barrel using wedge clamp (v0.4 on uses stock barrel). Changed old barrel clamp file name to forend
• v0.5 moved receiver barrel clamp wedge to forend to make receiver easier to print added forend filler piece to close gap below barrel
  
  Thank you ctrlpew for the barrel parts.