Neo Warped Perspective 1911 Grip Panels: Laffs Dynamics
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 40%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on
the firearm.
File | Extension |
---|---|
Neo 1911 Warped Perspective Panels.zip | zip |
Version: 1.0.0 latest
Initial release
Neo Warped Perspective 1911 Grip Panels: Laffs Dynamics
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 40%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on
the firearm.
2K
307
Dec 23, 2022
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
Neo 1911 Warped Perspective Panels.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.