Organic Typewriter M-Lok AFG: Laffs Dynamics
A skeletonized variant of the original FFFTech/Laffs Dynamics Typewriter M-Lok AFG. Has curved reinforcement struts for protection from damaging impact forces. Aesthetics are more natural, less synthetic, with less straight lines in the design's silhouette.
Requires 4 full non-populated M-Lok slots to mount.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm - .18mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 32%
Support Material Percentage: 18%
Print the AFG upside down.
Hardware Needed:
3x M5x10 Hex Socketed Machine Screw/Bolt
3x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Notes:
1) As of 2022; AFGs (Angled Foregrips) are still legal to use on handguns.
Accreditations:
Sheridan: Requested a similar design to be made; which inspired this design's creation. Provided a base model to work from, aiding in creating this design's overall dimensions to be similar to the Model 1928's foregrip.
File | Extension |
---|---|
Organic Typewriter M-Lok AFG.zip | zip |
Version: 1.0.0 latest
Initial release
Organic Typewriter M-Lok AFG: Laffs Dynamics
A skeletonized variant of the original FFFTech/Laffs Dynamics Typewriter M-Lok AFG. Has curved reinforcement struts for protection from damaging impact forces. Aesthetics are more natural, less synthetic, with less straight lines in the design's silhouette.
Requires 4 full non-populated M-Lok slots to mount.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm - .18mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 32%
Support Material Percentage: 18%
Print the AFG upside down.
Hardware Needed:
3x M5x10 Hex Socketed Machine Screw/Bolt
3x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Notes:
1) As of 2022; AFGs (Angled Foregrips) are still legal to use on handguns.
Accreditations:
Sheridan: Requested a similar design to be made; which inspired this design's creation. Provided a base model to work from, aiding in creating this design's overall dimensions to be similar to the Model 1928's foregrip.
2K
309
Sep 06, 2022
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
File | Extension |
---|---|
Organic Typewriter M-Lok AFG.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.