A1 Handguard (MP5K)
about
A1 Handguard (MP5K): Laffs Dynamics
Concave handguard for the H&K MP5K & MKE AP5-M / AP5-P PDWs. Ridged, along with a frontal handstop to avoid muzzle popping your hand.
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
files
| File | Extension |
|---|---|
| HG-4 (MP5K).zip | zip |
versions
Version: HG-4 Handguard (MP5K) latest
HG-4 (MP5K): Laffs Dynamics
Concave handguard for the H&K MP5K & MKE AP5-M / AP5-P PDWs. Ridged, along with a frontal handstop to avoid muzzle popping your hand.
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
Version: 1.0.0
initial upload
about
A1 Handguard (MP5K): Laffs Dynamics
Concave handguard for the H&K MP5K & MKE AP5-M / AP5-P PDWs. Ridged, along with a frontal handstop to avoid muzzle popping your hand.
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
creator
Metrics
Views
1.2K
Downloads
171
Project Info
release date
Sep 27, 2023
artifact types
CAD Object, Stereolithic object, Printable project
library category
fabrication method
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| HG-4 (MP5K).zip | zip |
versions
Version: HG-4 Handguard (MP5K) latest
HG-4 (MP5K): Laffs Dynamics
Concave handguard for the H&K MP5K & MKE AP5-M / AP5-P PDWs. Ridged, along with a frontal handstop to avoid muzzle popping your hand.
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
Version: 1.0.0
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
