10/22 3/9 Blast Vent Mini Brake
about
10/22 3/9 Blast Vent Mini Brake: Laffs Dynamics
A tapered, long muzzle break with gas redirection vents on the 3 and 9 o clock postions of the device. Shorter variant.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%
Support Material Percentage: 18%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
files
| File | Extension |
|---|---|
| 10-22 3-9 Blast Vent Mini Brake.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
10/22 3/9 Blast Vent Mini Brake: Laffs Dynamics
A tapered, long muzzle break with gas redirection vents on the 3 and 9 o clock postions of the device. Shorter variant.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%
Support Material Percentage: 18%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
creator
Metrics
Views
617
Downloads
74
Project Info
release date
Nov 23, 2022
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0
Firearm Info
type
Rifle
platform
10/22
caliber
.22LR
part
Muzzle Device
files
| # | File | Extension |
|---|---|---|
| 1 | 10-22 3-9 Blast Vent Mini Brake.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
