uses a 6mm spring or 1/4 in, 50mm or 2in long mcmastercarr 9657K383
2x short sections of paperclip to retain the spring assembly
2x 91290A171 m3 bolts
To assemble put the bolts in the sleeves and drop it all into the buttpad then press them below flush and cross pin with the paperclip
you can adjust the latch sickout by turning the screws
May want to round the bolt tips with a file
Credit
Unseenkiller
File | Extension |
---|---|
Unseenkiller - A2 with spring latches_.step | step |
Version: 1.0.0 latest
initial upload
uses a 6mm spring or 1/4 in, 50mm or 2in long mcmastercarr 9657K383
2x short sections of paperclip to retain the spring assembly
2x 91290A171 m3 bolts
To assemble put the bolts in the sleeves and drop it all into the buttpad then press them below flush and cross pin with the paperclip
you can adjust the latch sickout by turning the screws
May want to round the bolt tips with a file
Credit
Unseenkiller
122
31
Unseenkiller - A2 Multi Position-Mounted Fixed Stock (v1.1)
Oct 31, 2024
United States
English
No license
File | Extension |
---|---|
Unseenkiller - A2 with spring latches_.step | step |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.