Trigger Cut 1911 Grip Panels: Laffs Dynamics
A set of grip panels for the M1911 pistol (and compatible variants) with the top/front portion of the panels scalloped where the index finger's first knuckle rests, more comfortable for the user.
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20% - 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on the firearm.
File | Extension |
---|---|
Trigger Cut 1911 Grip Set.zip | zip |
Version: 1.0.0 latest
Trigger Cut 1911 Grip Panels: Laffs Dynamics
A set of grip panels for the M1911 pistol (and compatible variants) with the top/front portion of the panels scalloped where the index finger's first knuckle rests, more comfortable for the user.
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20% - 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on the firearm.
2.5K
Jul 05, 2022
United States
English
QmNtfA4qBNuQoZfW7TfgLFTYgtjh1bRiUZJbvbiyrZEgH1
File | Extension |
---|---|
Trigger Cut 1911 Grip Set.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.