Storage Grip V2 (3DP PCC)
about
Storage Grip V2 (3DP PCC): Laffs Dynamics
The original Laffs Dynamics Storage Grip V2, adapted to work with 3D printed pistol caliber carbines.
Mounts to:
- MOD-9 Platform
- WTF-9
- FGC-9 Platform
- Partisan-9
- Shuty AP9
- KC9
Has two different textured locking tab hatches.
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 220C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .16mm
- Wall Thickness: .40
- Wall Perimeters: 7+
- Infill: 32%
- Support Material Percentage: 18%
Hardware Needed:
- 1x Allen Head Screw, 1/4-28 x 1"
- 1x Steel Star Washer
- 1x Safety Selector Detent Pin
- 1x Safety Selector Detent Spring
- 1x M3x12mm (or M3x15mm) Hex Set Screw
Notes:
- Storage Grip V2 can hold roughly a little over half a standard pack of Skittles.
- The original Storage Grip V2 can be found here: https://defcad.com/library/b105b346-b4b4-4d46-952c-b84063624573/
files
| File | Extension |
|---|---|
| Storage Grip V2 (3D PCC).zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Storage Grip V2 (3DP PCC): Laffs Dynamics
The original Laffs Dynamics Storage Grip V2, adapted to work with 3D printed pistol caliber carbines.
Mounts to:
- MOD-9 Platform
- WTF-9
- FGC-9 Platform
- Partisan-9
- Shuty AP9
- KC9
Has two different textured locking tab hatches.
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 220C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .16mm
- Wall Thickness: .40
- Wall Perimeters: 7+
- Infill: 32%
- Support Material Percentage: 18%
Hardware Needed:
- 1x Allen Head Screw, 1/4-28 x 1"
- 1x Steel Star Washer
- 1x Safety Selector Detent Pin
- 1x Safety Selector Detent Spring
- 1x M3x12mm (or M3x15mm) Hex Set Screw
Notes:
- Storage Grip V2 can hold roughly a little over half a standard pack of Skittles.
- The original Storage Grip V2 can be found here: https://defcad.com/library/b105b346-b4b4-4d46-952c-b84063624573/
creator
Metrics
Views
1.4K
Downloads
318
Project Info
release date
Aug 12, 2023
artifact types
CAD Object, Stereolithic object, Printable project
library category
Printable Peripherals / Parts
fabrication methods
Primarily Printable, Hybrid
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Firearm Info
types
Pistol, Rifle, Pistol-Caliber Carbine
platforms
AR-15, AR-9, FGC-9, WTF-9, MOD-9, KC9, UBAR
part
Grip
files
| File | Extension |
|---|---|
| Storage Grip V2 (3D PCC).zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
