AGH MY SKELETONIZED NECK Mini Grip (AR-15)
about
AGH MY SKELETONIZED NECK Mini Grip (AR-15): Laffs Dynamics
I warned ya in the original release I'd finish the job! Snapped my neck and now I'm a spooky bone rattle boi!
Skeletonized variant of the original AGH MY NECK Mini Grip.
Front to Back Length: ~50mm (Excluding top grip mounting section.)
Side to Side Width: Swells from 22.32mm out to 30.70mm
Top to Bottom Height: 92.94mm
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
files
| File | Extension |
|---|---|
| AGH MY SKELTONIZED NECK Mini Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
AGH MY SKELETONIZED NECK Mini Grip (AR-15): Laffs Dynamics
I warned ya in the original release I'd finish the job! Snapped my neck and now I'm a spooky bone rattle boi!
Skeletonized variant of the original AGH MY NECK Mini Grip.
Front to Back Length: ~50mm (Excluding top grip mounting section.)
Side to Side Width: Swells from 22.32mm out to 30.70mm
Top to Bottom Height: 92.94mm
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
creator
Metrics
Views
1.5K
Downloads
240
Project Info
release date
Oct 13, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| AGH MY SKELTONIZED NECK Mini Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
