AK Edgerunner Grip
about
AK Edgerunner Grip: Laffs Dynamics
Derived from the original Laffs Dynamics Evo Edgerunner Grip, now for the AK weapons platform.
A very wide grip, at 36.5mm thick, with a skeletonized structure. Has an anti-slip extended grip toe to help keep your hand in place.
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .16mm
- Wall Thickness: .40
- Wall Perimeters: 6+
- Infill: 65%+
- Support Material Percentage: 18%
- Print the grip upside down
Hardware Needed:
- 1x OEM AK Grip Screw
files
| File | Extension |
|---|---|
| AK Edgerunner Grip.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
AK Edgerunner Grip: Laffs Dynamics
Derived from the original Laffs Dynamics Evo Edgerunner Grip, now for the AK weapons platform.
A very wide grip, at 36.5mm thick, with a skeletonized structure. Has an anti-slip extended grip toe to help keep your hand in place.
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .16mm
- Wall Thickness: .40
- Wall Perimeters: 6+
- Infill: 65%+
- Support Material Percentage: 18%
- Print the grip upside down
Hardware Needed:
- 1x OEM AK Grip Screw
creator
Metrics
Views
2.1K
Downloads
290
Project Info
release date
Dec 06, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| AK Edgerunner Grip.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
