Disruptive Solutions AR15 Slidefire stock v2
Description
Looking through a thread about printing a bump fire stock I saw a lot of interest in printing one, but no one with a model of one, so heres that model. the spring/grip plug is just a cut down pistol grip and functions the same as the traditional slidefire stock. I wasn't able to find pictures of the actual internal retention mechanism used in the original slidefire stock So I had to improvise there and used a variation of the collapsing stock I designed for my lower receiver. As of yet this stock does not have the ability to lock in place for traditional semi-automatic fire. The stock mechanism itself attaches to a normal commercial carbine buffer tube. This stock has yet to be printed/tested. Model has been updated for printing in 8x8x8 print beds and all correct files included.
All Files are provided as is and open source.
File | Extension |
---|---|
STL/Stock_body_3.stl | stl |
STL/Stock_body_2.stl | stl |
STL/Stock_body_1.stl | stl |
STL/Grip_Plug.stl | stl |
Renders/grip_plug.jpg | jpg |
Renders/bumpfirestock3.jpg | jpg |
Renders/Bumpfirestock2.jpg | jpg |
Renders/Bumpfirestock1.jpg | jpg |
IGS/Stock_body_3.igs | igs |
IGS/Stock_body_2.igs | igs |
IGS/Stock_body_1.igs | igs |
IGS/Grip_Plug.igs | igs |
README.md | md |
Version: 2.0.0 latest
initial upload
Disruptive Solutions AR15 Slidefire stock v2
Description
Looking through a thread about printing a bump fire stock I saw a lot of interest in printing one, but no one with a model of one, so heres that model. the spring/grip plug is just a cut down pistol grip and functions the same as the traditional slidefire stock. I wasn't able to find pictures of the actual internal retention mechanism used in the original slidefire stock So I had to improvise there and used a variation of the collapsing stock I designed for my lower receiver. As of yet this stock does not have the ability to lock in place for traditional semi-automatic fire. The stock mechanism itself attaches to a normal commercial carbine buffer tube. This stock has yet to be printed/tested. Model has been updated for printing in 8x8x8 print beds and all correct files included.
All Files are provided as is and open source.
1.3K
283
Jun 27, 2024
CAD Object, Stereolithic object
United States
English
No license
File | Extension |
---|---|
STL/Stock_body_3.stl | stl |
STL/Stock_body_2.stl | stl |
STL/Stock_body_1.stl | stl |
STL/Grip_Plug.stl | stl |
Renders/grip_plug.jpg | jpg |
Renders/bumpfirestock3.jpg | jpg |
Renders/Bumpfirestock2.jpg | jpg |
Renders/Bumpfirestock1.jpg | jpg |
IGS/Stock_body_3.igs | igs |
IGS/Stock_body_2.igs | igs |
IGS/Stock_body_1.igs | igs |
IGS/Grip_Plug.igs | igs |
README.md | md |
Version: 2.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.