AWCY? Presents: The Carbon Alloy Mac DIY Upper

about

a carbon fiber mac upper thats diy using a cf square tube and plates

files

File Extension
STL/Jig + Cutting Tools 2/Trunnion-Hole-Jig/trunnion-hole-jig v1.stl stl
STL/Jig + Cutting Tools 2/Shop-Vac-Adapter/vacuum-interface (1).stl stl
STL/Jig + Cutting Tools 2/Shop-Vac-Adapter/vacum-adapter (1) (1).stl stl
STL/Jig + Cutting Tools 2/Shop-Vac-Adapter/free-motion-locking-lug (1).stl stl
STL/Jig + Cutting Tools 2/Multi-Cutting-Tool-Plate/rec-print-or.png png
STL/Jig + Cutting Tools 2/Multi-Cutting-Tool-Plate/dremel-guide-lock (1).stl stl
STL/Jig + Cutting Tools 2/Multi-Cutting-Tool-Plate/dremel guide (1) (1).stl stl
STL/Jig + Cutting Tools 2/Jig/cf-cutting-jig-point2mm-offset.stl stl
STL/Jig + Cutting Tools 2/Jig/CF Mac Side Charging Jig 9-25-23 v1.stl stl
STL/Jig + Cutting Tools 2/Dewalt Router Guide/CF Mac Side Charging Jig 9-25-23 v1.stl stl
STL/Handguards/Rifle/handguard-forward-ender3-compatible .stl stl
STL/Handguards/Rifle/HANDGUARD-REAR-SECTION.stl stl
STL/Handguards/Rifle/HANDGUARD-FORWARD.stl stl
STL/Handguards/Pistol/Hand-Guard.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Specific Feed Ramp.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Magazine Release.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Magazine Release - Extended Length.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Magazine Lower Receiver.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Magazine Lower Receiver (Reinforced).stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/Sten-Lower-Reciever.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/Magazine Release (2).stl stl
STL/Alloy-9-remix/Front and Rear parts/modified-right-rear (2).stl stl
STL/Alloy-9-remix/Front and Rear parts/modified-left-reat (2).stl stl
STL/Alloy-9-remix/Front and Rear parts/Front-section.stl stl
STL/Alloy-9-remix/readme.pdf pdf
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/lookatme.jpg jpg
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/STOCK.stl stl
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/PIC-ADAPTER.stl stl
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/BUTTPAD.stl stl
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/BUTTON.stl stl
STL/Accessories/Stocks-Braces-Adapters/qd-sling-adapter.stl stl
STL/Accessories/Stocks-Braces-Adapters/MPRTech Brace.zip zip
STL/Accessories/Stocks-Braces-Adapters/Angled-Forgrip-2.stl stl
STL/Accessories/Curved-Sten-Remix/STL/04. Base Plate Lock (2) (1) (1).stl stl
STL/Accessories/Curved-Sten-Remix/STL/03. Base Plate (1) (1) (1) (1).stl stl
STL/Accessories/Curved-Sten-Remix/STL/02. Follower (1) (1).stl stl
STL/Accessories/Curved-Sten-Remix/STL/01. Curved-Mag-Body.stl stl
STL/Accessories/Curved-Sten-Remix/STEP/Curved-Sten-Remix-DurbanPoisonPew-Assembly.step step
STL/Accessories/Curved-Sten-Remix/README.txt txt
STL/Accessories/Curved-Sten-Remix/Dannies-README.txt txt
STL/Accessories/Curved-Sten-Remix/DMB Sten Mags Guide.pdf pdf
STL/Accessories/Curved-Sten-Remix/Curved-Sten-Mag-Body-durban-remix.png png
STL/Accessories/Burnt-Bacon/Big-threads-burnt-bacon-1_2x36.stl stl
STL/Accessories/rail-grip-guard-adjusted.stl stl
STL/Accessories/afg-3.stl stl
STL/Accessories/afg-3-adjusted.stl stl
STL/Accessories/Rail-Grip-Guard.stl stl
STL/Accessories/QD-Sling-Adpater-adjusted.stl stl
STL/Accessories/Angled-Forgrip-2-adjusted.stl stl
STL/Accessories/Angled-Forgrip-2 (1).stl stl
RENDERS/oa's-build.jpg jpg
RENDERS/diy-mac-upper.png png
RENDERS/diy-mac-all-parts.png png
RENDERS/diy-mac-all-parts-2.png png
RENDERS/DB9 ALLOY-DIY-Mac-Upper-Poisoned-HandGuard.png png
DXF's for SCS/Right Plate.dxf dxf
DXF's for SCS/Left Plate.dxf dxf
README.txt txt
Carbon-Alloy-README-with-cutting-guide.pdf pdf

versions

Version: 1.0.0 latest

initial upload

about

a carbon fiber mac upper thats diy using a cf square tube and plates

Download

organization

Metrics

Views

1.9K

Downloads

91

Project Info

release date

Jun 06, 2024

artifact types

CAD Object, Stereolithic object

library category

Printable Firearms

fabrication method

Hybrid

release country

United States

language

English

license

Creative Commons Attribution-ShareAlike 4.0 International

Firearm Info

type

SMG

platform

MAC-11

caliber

9x19mm

files

File Extension
STL/Jig + Cutting Tools 2/Trunnion-Hole-Jig/trunnion-hole-jig v1.stl stl
STL/Jig + Cutting Tools 2/Shop-Vac-Adapter/vacuum-interface (1).stl stl
STL/Jig + Cutting Tools 2/Shop-Vac-Adapter/vacum-adapter (1) (1).stl stl
STL/Jig + Cutting Tools 2/Shop-Vac-Adapter/free-motion-locking-lug (1).stl stl
STL/Jig + Cutting Tools 2/Multi-Cutting-Tool-Plate/rec-print-or.png png
STL/Jig + Cutting Tools 2/Multi-Cutting-Tool-Plate/dremel-guide-lock (1).stl stl
STL/Jig + Cutting Tools 2/Multi-Cutting-Tool-Plate/dremel guide (1) (1).stl stl
STL/Jig + Cutting Tools 2/Jig/cf-cutting-jig-point2mm-offset.stl stl
STL/Jig + Cutting Tools 2/Jig/CF Mac Side Charging Jig 9-25-23 v1.stl stl
STL/Jig + Cutting Tools 2/Dewalt Router Guide/CF Mac Side Charging Jig 9-25-23 v1.stl stl
STL/Handguards/Rifle/handguard-forward-ender3-compatible .stl stl
STL/Handguards/Rifle/HANDGUARD-REAR-SECTION.stl stl
STL/Handguards/Rifle/HANDGUARD-FORWARD.stl stl
STL/Handguards/Pistol/Hand-Guard.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Specific Feed Ramp.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Magazine Release.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Magazine Release - Extended Length.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Magazine Lower Receiver.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/GLOCK MAG LOWER/Glock Magazine Lower Receiver (Reinforced).stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/Sten-Lower-Reciever.stl stl
STL/Alloy-9-remix/Lower-Reciever-Parts/Magazine Release (2).stl stl
STL/Alloy-9-remix/Front and Rear parts/modified-right-rear (2).stl stl
STL/Alloy-9-remix/Front and Rear parts/modified-left-reat (2).stl stl
STL/Alloy-9-remix/Front and Rear parts/Front-section.stl stl
STL/Alloy-9-remix/readme.pdf pdf
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/lookatme.jpg jpg
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/STOCK.stl stl
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/PIC-ADAPTER.stl stl
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/BUTTPAD.stl stl
STL/Accessories/Stocks-Braces-Adapters/RIFLE-LENGTH-STOCK/BUTTON.stl stl
STL/Accessories/Stocks-Braces-Adapters/qd-sling-adapter.stl stl
STL/Accessories/Stocks-Braces-Adapters/MPRTech Brace.zip zip
STL/Accessories/Stocks-Braces-Adapters/Angled-Forgrip-2.stl stl
STL/Accessories/Curved-Sten-Remix/STL/04. Base Plate Lock (2) (1) (1).stl stl
STL/Accessories/Curved-Sten-Remix/STL/03. Base Plate (1) (1) (1) (1).stl stl
STL/Accessories/Curved-Sten-Remix/STL/02. Follower (1) (1).stl stl
STL/Accessories/Curved-Sten-Remix/STL/01. Curved-Mag-Body.stl stl
STL/Accessories/Curved-Sten-Remix/STEP/Curved-Sten-Remix-DurbanPoisonPew-Assembly.step step
STL/Accessories/Curved-Sten-Remix/README.txt txt
STL/Accessories/Curved-Sten-Remix/Dannies-README.txt txt
STL/Accessories/Curved-Sten-Remix/DMB Sten Mags Guide.pdf pdf
STL/Accessories/Curved-Sten-Remix/Curved-Sten-Mag-Body-durban-remix.png png
STL/Accessories/Burnt-Bacon/Big-threads-burnt-bacon-1_2x36.stl stl
STL/Accessories/rail-grip-guard-adjusted.stl stl
STL/Accessories/afg-3.stl stl
STL/Accessories/afg-3-adjusted.stl stl
STL/Accessories/Rail-Grip-Guard.stl stl
STL/Accessories/QD-Sling-Adpater-adjusted.stl stl
STL/Accessories/Angled-Forgrip-2-adjusted.stl stl
STL/Accessories/Angled-Forgrip-2 (1).stl stl
RENDERS/oa's-build.jpg jpg
RENDERS/diy-mac-upper.png png
RENDERS/diy-mac-all-parts.png png
RENDERS/diy-mac-all-parts-2.png png
RENDERS/DB9 ALLOY-DIY-Mac-Upper-Poisoned-HandGuard.png png
DXF's for SCS/Right Plate.dxf dxf
DXF's for SCS/Left Plate.dxf dxf
README.txt txt
Carbon-Alloy-README-with-cutting-guide.pdf pdf

versions

Version: 1.0.0 latest

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.