Glock Ghost Ring Rear Sight V2.1.1: Laffs Dynamics
Version 2 of the original 3FTech Ghost Ring Rear Sight. Overall less bulky design. Aperture diameter reduced by .4mm.
Compatible with standard 6.5mm height front sights.
Update V2.1.1: Changed name of designer.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 28%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the sight on it's front face.
File | Extension |
---|---|
Glock Ghost Ring Rear Sight V2.1.1.zip | zip |
Version: Glock Ghost Ring Rear Sight V2.1.1 latest
Glock Ghost Ring Rear Sight V2.1.1: Laffs Dynamics
Version 2 of the original 3FTech Ghost Ring Rear Sight. Overall less bulky design. Aperture diameter reduced by .4mm.
Compatible with standard 6.5mm height front sights.
Update V2.1.1: Changed name of designer.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 28%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the sight on it's front face.
Version: 1.0.0
Initial release
Glock Ghost Ring Rear Sight V2.1.1: Laffs Dynamics
Version 2 of the original 3FTech Ghost Ring Rear Sight. Overall less bulky design. Aperture diameter reduced by .4mm.
Compatible with standard 6.5mm height front sights.
Update V2.1.1: Changed name of designer.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 28%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the sight on it's front face.
4.7K
Jul 19, 2023
3D Printer
United States
English
File | Extension |
---|---|
Glock Ghost Ring Rear Sight V2.1.1.zip | zip |
Version: Glock Ghost Ring Rear Sight V2.1.1 latest
Glock Ghost Ring Rear Sight V2.1.1: Laffs Dynamics
Version 2 of the original 3FTech Ghost Ring Rear Sight. Overall less bulky design. Aperture diameter reduced by .4mm.
Compatible with standard 6.5mm height front sights.
Update V2.1.1: Changed name of designer.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 28%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the sight on it's front face.
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.