10/22 Hex Round Flash Suppressor: FFFTech/FFFTechnology
A five vent flash suppressor that transitions from a cylindrical to hexagonal.
Printer Used: Ender 3 V2
Filament Used: PLA+
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill Pattern: Gyroid
Material Flow: 100%
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.