"Mountain Scout" Fixed Carbine Buttstock
about
"Mountain Scout" Fixed Carbine Buttstock: FFFTech/FFFTechnology
A lightweight, Club Foot styled fixed buttstock; slightly longer than the 3FTech Asphalt Escort Buttstock. Designed to withstand blunt impacts, such as when hiking mountainous terrain.
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 225C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 20%+
Infill Pattern: Gyroid
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
Accreditations:
theOtherSig: Printed and assembled the buttstock; and provided images of the design attached to his custom build AR-15.
files
| File | Extension |
|---|---|
| Mountain Scout.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
"Mountain Scout" Fixed Carbine Buttstock: FFFTech/FFFTechnology
A lightweight, Club Foot styled fixed buttstock; slightly longer than the 3FTech Asphalt Escort Buttstock. Designed to withstand blunt impacts, such as when hiking mountainous terrain.
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 225C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 20%+
Infill Pattern: Gyroid
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
Accreditations:
theOtherSig: Printed and assembled the buttstock; and provided images of the design attached to his custom build AR-15.
creator
Metrics
Views
2.1K
Downloads
456
Project Info
release date
Mar 29, 2022
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Firearm Info
type
Rifle
part
Stock
version hash
QmTvtAjHxARVFPWyv8hhyFiXqmXB9hLgogQ1yAALMmHcyo
files
| File | Extension |
|---|---|
| Mountain Scout.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
