"Back to Basics" 1911 Grip Panels: Laffs Dynamics
A basic, no frills set of grip panels for the M1911 pistol (and compatible variants)
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20% - 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
PrintYour2A / PY2A: Printed and assembled the grip panels onto their Springfield Armory
1911, as well as advised the print settings for others to manufacture with. Provided images
of the panels by themselves, as well as on the firearm.
File | Extension |
---|---|
Back to Basics 1911 Grip Panels.zip | zip |
Version: 1.0.0 latest
"Back to Basics" 1911 Grip Panels: Laffs Dynamics
A basic, no frills set of grip panels for the M1911 pistol (and compatible variants)
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20% - 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
PrintYour2A / PY2A: Printed and assembled the grip panels onto their Springfield Armory
1911, as well as advised the print settings for others to manufacture with. Provided images
of the panels by themselves, as well as on the firearm.
2.3K
248
Jul 05, 2022
United States
English
QmQjy2Ys9h6m2UnSwPHQb2ZTQoWMne2C3xaeTq9a31WrGV
File | Extension |
---|---|
Back to Basics 1911 Grip Panels.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.