Balance Grips by FFFTech/FFFTechnology
A basic set of slim grips for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable grip, whether prone or offhand shooting. Two designs are available, a standard smooth grip, and a ridge textured grip.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .22mm
Standard Layer Height: .18mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 20% - 32%
Infill Pattern: Gyroid
Support Material Percentage: 10% (Supports only needed for the bottom part of the grip that raises from the print bed)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent
1x Safety Selector Detent Spring
File | Extension |
---|---|
Balance Grips.zip | zip |
Version: 1.0.0 latest
Balance Grips by FFFTech/FFFTechnology
A basic set of slim grips for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable grip, whether prone or offhand shooting. Two designs are available, a standard smooth grip, and a ridge textured grip.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .22mm
Standard Layer Height: .18mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 20% - 32%
Infill Pattern: Gyroid
Support Material Percentage: 10% (Supports only needed for the bottom part of the grip that raises from the print bed)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent
1x Safety Selector Detent Spring
6.8K
Jul 18, 2022
3D Printer
United States
English
QmRtS3ovXSmTrd83V97rGVkahdptFcy3j3mpXymaq27gCX
File | Extension |
---|---|
Balance Grips.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.