Balance Mini Grip (AR-15)
about
A basic slim and compact grip for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable grip, whether prone or offhand shooting. This grip is a shortened version of the original Balance Grips, and is designed for people with smaller hands and(or) those that wish to have their AR-15 as compact as possible. Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent 1x Safety Selector Detent Spring
files
| File | Extension |
|---|---|
| Balance Mini Grip V1.1.zip | zip |
versions
Version: Balance Mini Grip V1.1 latest
Balance Mini Grip V1.1 by FFFTech/FFFTechnology
A basic slim and compact grip for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable grip, whether prone or offhand shooting. This grip is a shortened version of the original Balance Grips, and is designed for people with smaller hands and(or) those that wish to have their AR-15 as compact as possible.
Update V1.1: Fixed void(s) in STL mesh.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .22mm
Standard Layer Height: .18mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 20% - 32%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent
1x Safety Selector Detent Spring
Version: 1.0.0
about
A basic slim and compact grip for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable grip, whether prone or offhand shooting. This grip is a shortened version of the original Balance Grips, and is designed for people with smaller hands and(or) those that wish to have their AR-15 as compact as possible. Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent 1x Safety Selector Detent Spring
creator
Metrics
Views
9.5K
files
| File | Extension |
|---|---|
| Balance Mini Grip V1.1.zip | zip |
versions
Version: Balance Mini Grip V1.1 latest
Balance Mini Grip V1.1 by FFFTech/FFFTechnology
A basic slim and compact grip for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable grip, whether prone or offhand shooting. This grip is a shortened version of the original Balance Grips, and is designed for people with smaller hands and(or) those that wish to have their AR-15 as compact as possible.
Update V1.1: Fixed void(s) in STL mesh.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .22mm
Standard Layer Height: .18mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 20% - 32%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent
1x Safety Selector Detent Spring
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
