BigMac
about
Lower receiver for .45ACP MAC-10 upper. Uses AR FCG.
Included is a modified and lengthened version of azgiliath's excellent skeleton stock and hinge: ASG CZ EVO 3 Scorpion skeleton stock by azgiliath on Thingiverse: https://www.thingiverse.com/thing:4338326.
Also a lengthened version of AWCY's excellent Thump n Grind Stock.
Thanks to the designers of MacDaddy, Mac n' Cheese, SVTR, dB9, Sumac, STM9, all of which I've built and tested, and keep in my arsenal:)
AR Hammer may need to be shaved slightly at top for clearance.
files
| File | Extension |
|---|---|
| Wide Butt Pad.3mf | 3mf |
| Skeleton Hinge Adapter.3mf | 3mf |
| Receiver Rear Cap.3mf | 3mf |
| MAC10 Upper.step | step |
| MAC10 Upper.3mf | 3mf |
| Lower Receiver.3mf | 3mf |
| Grip.3mf | 3mf |
| Feed Ramp.3mf | 3mf |
| Collar (1).3mf | 3mf |
| BigMac v29.step | step |
| BigMac Skeleton Stock.3mf | 3mf |
| Adapter_int.3mf | 3mf |
| AWCY Stock Hinge Adapter.3mf | 3mf |
| AWCY Stock 50mm extended.3mf | 3mf |
versions
Version: 1.0.1 latest
Introducing new step assembly
Version: 1.0.0
Initial release
about
Lower receiver for .45ACP MAC-10 upper. Uses AR FCG.
Included is a modified and lengthened version of azgiliath's excellent skeleton stock and hinge: ASG CZ EVO 3 Scorpion skeleton stock by azgiliath on Thingiverse: https://www.thingiverse.com/thing:4338326.
Also a lengthened version of AWCY's excellent Thump n Grind Stock.
Thanks to the designers of MacDaddy, Mac n' Cheese, SVTR, dB9, Sumac, STM9, all of which I've built and tested, and keep in my arsenal:)
AR Hammer may need to be shaved slightly at top for clearance.
creator
Metrics
Views
6.2K
Downloads
523
Project Info
release date
2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
No license
version hash
QmeRSfdzmby39PSaCMtWkXcPwgBWYhQ4GtKgKycwVywwZu
files
| File | Extension |
|---|---|
| Wide Butt Pad.3mf | 3mf |
| Skeleton Hinge Adapter.3mf | 3mf |
| Receiver Rear Cap.3mf | 3mf |
| MAC10 Upper.step | step |
| MAC10 Upper.3mf | 3mf |
| Lower Receiver.3mf | 3mf |
| Grip.3mf | 3mf |
| Feed Ramp.3mf | 3mf |
| Collar (1).3mf | 3mf |
| BigMac v29.step | step |
| BigMac Skeleton Stock.3mf | 3mf |
| Adapter_int.3mf | 3mf |
| AWCY Stock Hinge Adapter.3mf | 3mf |
| AWCY Stock 50mm extended.3mf | 3mf |
versions
Version: 1.0.1 latest
Introducing new step assembly
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
