Blitz Grip (AR-15): FFFTech/FFFTechnology
A design inspired by the Axis force's weapons (Primarily Germany) from the 1940s. Has a radically swept back grip, with side indentations that are visually similar to sheet metal stampings.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
File | Extension |
---|---|
Blitz Grip.zip | zip |
Version: 1.0.0 latest
Blitz Grip (AR-15): FFFTech/FFFTechnology
A design inspired by the Axis force's weapons (Primarily Germany) from the 1940s. Has a radically swept back grip, with side indentations that are visually similar to sheet metal stampings.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
2K
270
Nov 20, 2021
United States
English
QmUpVfRbG5wWfHY7QMy8PtCBonPjxvp8QY8Qb3jZJEtjx8
File | Extension |
---|---|
Blitz Grip.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.