Bonk Rifle
about
.22 survival rifle.
Main assembly should be quite obvious, as shown in the pictures. Barrel lock retainer thingy can be glued in place with epoxy, jb weld or any superglue.
It's possible to use .22, .25 and .27 ID barrels to fire corresponding pellets with .27 or .25 cal cartridges, but bores larger than 6 mm should not be used with .22lr cartridges, as primer strikes become unreliable and their casings tend to rupture and accuracy becomes abysmal.
*Pirate edition is an older prototype version of this firearm. these files may contain some minor bugs and nuisances, such as incomplete screw holes and the need for glue to secure the left grip.
files
| File | Extension |
|---|---|
| Pirate_edition/Pirate_edition_lid.stl | stl |
| Pirate_edition/Pirate_bonk.png | png |
| Pirate_edition/Body_pirate_edition.stl | stl |
| lid.stl | stl |
| lever1.stl | stl |
| Trigger.stl | stl |
| Striker_25_27cal.stl | stl |
| Striker_22lr.stl | stl |
| Stock_part_3.stl | stl |
| Stock_part2.stl | stl |
| Stock_part1.stl | stl |
| St_Lock2.stl | stl |
| St_Lock1.stl | stl |
| Sear.stl | stl |
| Lock.stl | stl |
| Lever2.stl | stl |
| Bonk3.png | png |
| Bonk2.png | png |
| Bonk1.png | png |
| Body_25_27cal.stl | stl |
| Body_22lr.stl | stl |
| Barrel_short_with_rail.stl | stl |
| Barrel_short.stl | stl |
| Barrel_long_with_rail.stl | stl |
| Barrel_lock_retainer.stl | stl |
| BONK_manual.txt | txt |
| 25_and_27_cal_coin_drilling_jig.stl | stl |
| 22lr_coin_drilling_jig.stl | stl |
versions
Version: 1.0.0 latest
initial upload
about
.22 survival rifle.
Main assembly should be quite obvious, as shown in the pictures. Barrel lock retainer thingy can be glued in place with epoxy, jb weld or any superglue.
It's possible to use .22, .25 and .27 ID barrels to fire corresponding pellets with .27 or .25 cal cartridges, but bores larger than 6 mm should not be used with .22lr cartridges, as primer strikes become unreliable and their casings tend to rupture and accuracy becomes abysmal.
*Pirate edition is an older prototype version of this firearm. these files may contain some minor bugs and nuisances, such as incomplete screw holes and the need for glue to secure the left grip.
creator
Metrics
Views
3.4K
Downloads
189
Project Info
release date
Jul 04, 2023
artifact types
CAD Object, Stereolithic object
library category
fabrication method
release country
United States
language
English
license
No license
files
| File | Extension |
|---|---|
| Pirate_edition/Pirate_edition_lid.stl | stl |
| Pirate_edition/Pirate_bonk.png | png |
| Pirate_edition/Body_pirate_edition.stl | stl |
| lid.stl | stl |
| lever1.stl | stl |
| Trigger.stl | stl |
| Striker_25_27cal.stl | stl |
| Striker_22lr.stl | stl |
| Stock_part_3.stl | stl |
| Stock_part2.stl | stl |
| Stock_part1.stl | stl |
| St_Lock2.stl | stl |
| St_Lock1.stl | stl |
| Sear.stl | stl |
| Lock.stl | stl |
| Lever2.stl | stl |
| Bonk3.png | png |
| Bonk2.png | png |
| Bonk1.png | png |
| Body_25_27cal.stl | stl |
| Body_22lr.stl | stl |
| Barrel_short_with_rail.stl | stl |
| Barrel_short.stl | stl |
| Barrel_long_with_rail.stl | stl |
| Barrel_lock_retainer.stl | stl |
| BONK_manual.txt | txt |
| 25_and_27_cal_coin_drilling_jig.stl | stl |
| 22lr_coin_drilling_jig.stl | stl |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
