The second version of the BPNVG by Stubbs / The_Gun_Foogle, this DIY NVG can be configured for either monocular, binocular or panoramic use. This project was developed and released by Stubbs, and development has continued by JustCallMeKoko on his Discord.
The package uploaded to DEFCAD is a combined package of three earlier releases. It represents the latest compilation of the BPNVG II project.
Please consult the following resources for more information:
File | Extension |
---|---|
Editable STEP files/BPNVG II Sensor Mount.step | step |
Editable STEP files/BPNVG II Lens Retainer.step | step |
Editable STEP files/BPNVG II Binary Main Body.step | step |
Editable STEP files/BPNVG Bridge.step | step |
Internal Screen Mount.stl | stl |
Internal Board Mount.stl | stl |
Front mount for impact lens.stl | stl |
Bridge for J-arm Parts.stl | stl |
BPNVG Monacle Standalone for Rifle mount.stl | stl |
BPNVG II single monacle lens retainer.stl | stl |
BPNVG II Single monacle body.stl | stl |
BPNVG II Sensor Mount.stl | stl |
BPNVG II Lens Ring Single.step | step |
BPNVG II Lens Retainer.stl | stl |
BPNVG II Gasket Spacer.stl | stl |
BPNVG II Binary Main Body.stl | stl |
BPNVG Bridge.stl | stl |
Version: 1.0.0 latest
Initial release
The second version of the BPNVG by Stubbs / The_Gun_Foogle, this DIY NVG can be configured for either monocular, binocular or panoramic use. This project was developed and released by Stubbs, and development has continued by JustCallMeKoko on his Discord.
The package uploaded to DEFCAD is a combined package of three earlier releases. It represents the latest compilation of the BPNVG II project.
Please consult the following resources for more information:
14K
660
Dec 25, 2021
3D Printer
United States
English
No license
QmPYmKeCj2JvLyUdxf3AQokq6EGodBFZkPX4N7d16fTGLk
File | Extension |
---|---|
Editable STEP files/BPNVG II Sensor Mount.step | step |
Editable STEP files/BPNVG II Lens Retainer.step | step |
Editable STEP files/BPNVG II Binary Main Body.step | step |
Editable STEP files/BPNVG Bridge.step | step |
Internal Screen Mount.stl | stl |
Internal Board Mount.stl | stl |
Front mount for impact lens.stl | stl |
Bridge for J-arm Parts.stl | stl |
BPNVG Monacle Standalone for Rifle mount.stl | stl |
BPNVG II single monacle lens retainer.stl | stl |
BPNVG II Single monacle body.stl | stl |
BPNVG II Sensor Mount.stl | stl |
BPNVG II Lens Ring Single.step | step |
BPNVG II Lens Retainer.stl | stl |
BPNVG II Gasket Spacer.stl | stl |
BPNVG II Binary Main Body.stl | stl |
BPNVG Bridge.stl | stl |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.