My local Airsoft team requested this from me for a bunker, so here's what I came up with ;)
It works great with both GBB & AEG rifles and pistols.
Items Required:
4 x Wood Screws
4 x M3 x 12mm L
3 x M5 x 35mm L + 4 Nuts
2 x 8mm OD Carbon Rods x 650mm L
1 x 6mm OD Carbon Rod x 350mm L
!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.
!Don't forget to check out my other Cool designs and Follow my Weekly dose of KooKoo uploads, Enjoy ;)
File | Extension |
---|---|
combined.stl | stl |
TRIGGER_BAR.stl | stl |
TRIGGER.stl | stl |
RAIL_MOUNT_REAR.stl | stl |
RAIL_MOUNT_FRONT.stl | stl |
GRIP_MOUNT.stl | stl |
GRIP.stl | stl |
CLAMP_BODY.stl | stl |
Version: 1.0.0 latest
Initial release
My local Airsoft team requested this from me for a bunker, so here's what I came up with ;)
It works great with both GBB & AEG rifles and pistols.
Items Required:
4 x Wood Screws
4 x M3 x 12mm L
3 x M5 x 35mm L + 4 Nuts
2 x 8mm OD Carbon Rods x 650mm L
1 x 6mm OD Carbon Rod x 350mm L
!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.
!Don't forget to check out my other Cool designs and Follow my Weekly dose of KooKoo uploads, Enjoy ;)
2.5K
415
Jan 17, 2020
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
QmdnZXfiyJcrfoGsGd3gB6NCvVszgNDBaNMYF9nP2ebmju
File | Extension |
---|---|
combined.stl | stl |
TRIGGER_BAR.stl | stl |
TRIGGER.stl | stl |
RAIL_MOUNT_REAR.stl | stl |
RAIL_MOUNT_FRONT.stl | stl |
GRIP_MOUNT.stl | stl |
GRIP.stl | stl |
CLAMP_BODY.stl | stl |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.