Cali Comp NU11 Grip (AR-15): FFFTech/FFFTechnology
A California compliant version of the original 3FTech NU11 Grip.
The first grip of the "Null & Void" Grip Set.
A basic design; with the grip width being thicker towards it's heel.
Comes in both left hand blade and right hand blade models.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
File | Extension |
---|---|
Cali Comp NU11 Grip.zip | zip |
Version: 1.0.0 latest
Initial release
Cali Comp NU11 Grip (AR-15): FFFTech/FFFTechnology
A California compliant version of the original 3FTech NU11 Grip.
The first grip of the "Null & Void" Grip Set.
A basic design; with the grip width being thicker towards it's heel.
Comes in both left hand blade and right hand blade models.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1.3K
124
May 23, 2022
3D Printer
United States
English
QmeCUzKxSWjtQi1tXWHh19vaxXJCrs2PssAArgGLYeyph9
File | Extension |
---|---|
Cali Comp NU11 Grip.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.