Dummy Firearm - Glock 26
about
Dummy Firearm - Glock 26: Laffs Dynamics
Static model of a Glock 26 for educational purposes and force on force training.
Print in blue to match other commercial training firearms.
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .16mm
- Wall Thickness: .40
- Wall Perimeters: 4+
- Infill: 35%+
- Support Material Percentage: 18%
Assembly:
- After printing, apply cyanoacrylate in each dummy gun half alignment block pocket.
- Apply cyanoacrylate on all facets of the printed alignment blocks (Make sure you printed two of them)
- Press the aignment blocks into their pockets on of of the dummy Glock 26 halves.
- Align and press both halves of the dummy firearm together.
- Apply clamps to the design and wait at least 1 hour for the cyanoacrylate to cure.
files
| File | Extension |
|---|---|
| Dummy Firearm - Glock 26.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Dummy Firearm - Glock 26: Laffs Dynamics
Static model of a Glock 26 for educational purposes and force on force training.
Print in blue to match other commercial training firearms.
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .16mm
- Wall Thickness: .40
- Wall Perimeters: 4+
- Infill: 35%+
- Support Material Percentage: 18%
Assembly:
- After printing, apply cyanoacrylate in each dummy gun half alignment block pocket.
- Apply cyanoacrylate on all facets of the printed alignment blocks (Make sure you printed two of them)
- Press the aignment blocks into their pockets on of of the dummy Glock 26 halves.
- Align and press both halves of the dummy firearm together.
- Apply clamps to the design and wait at least 1 hour for the cyanoacrylate to cure.
creator
Metrics
Views
4.1K
Downloads
254
Project Info
release date
Dec 06, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| Dummy Firearm - Glock 26.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
