CMW Mod Gripstop: FFFTech-Chairmanwon
A mod of the 3FTech Gripstop; enhanced via Chairmanwon's many fantastic stipple patterns.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 215C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 -5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 30%
Print the Gripstop upside-down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditation:
* Chairmanwon; Making a multiple modded stipple versions of this foregrip/handstop. This version is being released separately from the original 3FTech Gripstop due to the many modded versions created, and I feel this deserves it's own complete release. This is fantastic work he has done.
File | Extension |
---|---|
CMW Mod Gripstop.zip | zip |
Version: 1.0.0 latest
CMW Mod Gripstop: FFFTech-Chairmanwon
A mod of the 3FTech Gripstop; enhanced via Chairmanwon's many fantastic stipple patterns.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 215C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 -5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 30%
Print the Gripstop upside-down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditation:
* Chairmanwon; Making a multiple modded stipple versions of this foregrip/handstop. This version is being released separately from the original 3FTech Gripstop due to the many modded versions created, and I feel this deserves it's own complete release. This is fantastic work he has done.
3.2K
271
Sep 10, 2021
United States
English
Qmd4XeXEj4XnN1uqkcunD3oYkYENh3ViynA4A3gc5d9cSw
File | Extension |
---|---|
CMW Mod Gripstop.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.