FBS-5 (AKM) V1.0.2
about
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
files
| File | Extension |
|---|---|
| FBS-5 (AKM) V1.0.2.zip | zip |
versions
Version: FBS-5 (AKM) V1.0.2 latest
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Version: FBS-5 (AKM) V1.0.1
FBS-5 (AKM) V1.0.1: Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Version: 1.0.0
initial upload
about
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
creator
Metrics
Views
1.6K
Downloads
213
Project Info
release date
Sep 05, 2023
artifact types
Stereolithic object, Printable project
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| FBS-5 (AKM) V1.0.2.zip | zip |
versions
Version: FBS-5 (AKM) V1.0.2 latest
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Version: FBS-5 (AKM) V1.0.1
FBS-5 (AKM) V1.0.1: Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Version: 1.0.0
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
