12GA Simulator Blank Round

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

about

12GA Simulator Blank Round: Laffs Dynamics

 

A 2 3/4in shotshell designed for function and sound simulation. Uses the common 209 shotshell primer for sound simulated effect. Can be used as an 

anti-avian device. (The sound of firing the shell to scare off birds from a general area; do not aim at birds.)

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 220C 

Bed: 56C 

First Layer Print Height: .20mm 

Standard Layer Height: .16mm

Wall Thickness: .40mm

Wall Perimeters: 7+

Infill: 70%+

Support Material Percentage: 20%

 

Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.

 

 

 

Hardware Needed: 

 

1x 209 Shotshell Primer

 

 

 

WARNING: Not designed to be used with anying other than the 209 primer. Do NOT fill the simulator round with any payload/projectile, as this 

will cause structural failure of the design and may cause injury/death. I take no responsibility for misuse, mishandling, and(or) failure to 

properly construct the design that may lead to injury or death. 

 

Do not point a firearm loaded with this (or any) ammunition, regardless of the fact this designed ammunition has no projectile. 

files

File Extension
12GA Primer Blank Round.zip zip

versions

Version: 1.0.0 latest

initial upload

about

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

12GA Simulator Blank Round: Laffs Dynamics

 

A 2 3/4in shotshell designed for function and sound simulation. Uses the common 209 shotshell primer for sound simulated effect. Can be used as an 

anti-avian device. (The sound of firing the shell to scare off birds from a general area; do not aim at birds.)

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 220C 

Bed: 56C 

First Layer Print Height: .20mm 

Standard Layer Height: .16mm

Wall Thickness: .40mm

Wall Perimeters: 7+

Infill: 70%+

Support Material Percentage: 20%

 

Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.

 

 

 

Hardware Needed: 

 

1x 209 Shotshell Primer

 

 

 

WARNING: Not designed to be used with anying other than the 209 primer. Do NOT fill the simulator round with any payload/projectile, as this 

will cause structural failure of the design and may cause injury/death. I take no responsibility for misuse, mishandling, and(or) failure to 

properly construct the design that may lead to injury or death. 

 

Do not point a firearm loaded with this (or any) ammunition, regardless of the fact this designed ammunition has no projectile. 

Download

Metrics

Views

813

Downloads

89

Project Info

release date

Mar 05, 2024

artifact type

Printable project

library category

Ammunition

fabrication method

Primarily Printable

fabrication tool

3D Printer

release country

United States

language

English

license

Creative Commons Attribution-NonCommercial-NoDerivatives 3.0

Firearm Info

type

Shotgun

caliber

12ga

files

File Extension
12GA Primer Blank Round.zip zip

versions

Version: 1.0.0 latest

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.