M14 Warrior Fae v2 Magazine-Shanrilivan
about
WarFairy Arms M14 Magazine
#### Description
Its a M14 magazine, not a whole lot to say about it.
#### Instructions
* You will need sandpaper or steel wool for surface finishing.
* Print all magazine bodies from back to front, support material on. When cleaning support structures away, pay special attention to the inside surface of the feed lips to ensure smooth dispensing of ammunition.
* For restricted capacity magazines, you will need the follower with the mag block cut.
* All magazines use the same base plate and require an M14 magazine spring.
* Bolt hold open does NOT work with any of these magazines.
As always, follow local laws when printing magazines.
files
| File | Extension |
|---|---|
| M14_Warrior_Fae_v2_Magazine-Shanrilivan.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
WarFairy Arms M14 Magazine
#### Description
Its a M14 magazine, not a whole lot to say about it.
#### Instructions
* You will need sandpaper or steel wool for surface finishing.
* Print all magazine bodies from back to front, support material on. When cleaning support structures away, pay special attention to the inside surface of the feed lips to ensure smooth dispensing of ammunition.
* For restricted capacity magazines, you will need the follower with the mag block cut.
* All magazines use the same base plate and require an M14 magazine spring.
* Bolt hold open does NOT work with any of these magazines.
As always, follow local laws when printing magazines.
creator
Metrics
Views
426
Downloads
208
Project Info
release date
Feb 1, 2024
artifact type
CAD Object
library category
Printable Magazines
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
No license
Firearm Info
type
Rifle
files
| File | Extension |
|---|---|
| M14_Warrior_Fae_v2_Magazine-Shanrilivan.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
