Oil Filter Adapter Compact
about
If you need an improvised sound suppressor but in a more compact form, this is exactly what you've been looking for. Thread profiles have been overlapped to give all the engagement of the previous design in the smallest package.
Designed for 1/2"x28 TPI barrels.
Threaded for most commonly available oil filters at 3/4"x14 TPI.
Flat sides for easy attachment at 20mm
*For Educational Purposes*
files
| File | Extension |
|---|---|
| Oil Filter Adapter Revised.stl | stl |
| Oil Filter Adapter Compact Revised.step | step |
versions
Version: 1.1 latest
Back by popular demand, I present a revised compact oil filter adapter. This version features a new mounting pattern for easy install/removal. Previous version used flat faces for wrench attachment, this makes it even easier with a textured surface to hand/glove/plier tighten it to the barrel. Other features remain the same for all the oil can plinking you have been enjoying!
-Textured attachment surface replaces whrench flats
-1/2"x28TPI internal thread for most small caliber barrels
-3/4"x16TPI external thread for most common oil filters.
-OAL of only 20mm, Diameter of 21mm
Version: V2
Update includes:
-Opening increased from 10mm to 11mm for greater clearance
-Threaded portion length contained to 1/2" for both internal and external portions to avoid excess
-Collar length increased for higher strength
Version: 1.0.0
initial upload
about
If you need an improvised sound suppressor but in a more compact form, this is exactly what you've been looking for. Thread profiles have been overlapped to give all the engagement of the previous design in the smallest package.
Designed for 1/2"x28 TPI barrels.
Threaded for most commonly available oil filters at 3/4"x14 TPI.
Flat sides for easy attachment at 20mm
*For Educational Purposes*
creator
Metrics
Views
3.2K
Downloads
608
Project Info
release date
May 14, 2024
artifact type
library category
fabrication method
release country
United States
language
English
license
No license
files
| File | Extension |
|---|---|
| Oil Filter Adapter Revised.stl | stl |
| Oil Filter Adapter Compact Revised.step | step |
versions
Version: 1.1 latest
Back by popular demand, I present a revised compact oil filter adapter. This version features a new mounting pattern for easy install/removal. Previous version used flat faces for wrench attachment, this makes it even easier with a textured surface to hand/glove/plier tighten it to the barrel. Other features remain the same for all the oil can plinking you have been enjoying!
-Textured attachment surface replaces whrench flats
-1/2"x28TPI internal thread for most small caliber barrels
-3/4"x16TPI external thread for most common oil filters.
-OAL of only 20mm, Diameter of 21mm
Version: V2
Update includes:
-Opening increased from 10mm to 11mm for greater clearance
-Threaded portion length contained to 1/2" for both internal and external portions to avoid excess
-Collar length increased for higher strength
Version: 1.0.0
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
