Before the most recent release of the Prof. Parabellum DIY AR9, I went through and made printable guides to cut the steel parts for the upper assembly. This includes the Upper Receiver Sleeve, Bolt Carrier Tube, and the Bolt.
You can print them out, put them over each metal section and they should give you easy to mark cutting guides so you're not having to eyeball it. The bolt section has many parts to test depths and hole locations, as it should.
Hope this helps everyone.
-Boost the Signal
File | Extension |
---|---|
Upper_Receiver_Sleeve_Cutting_Guide.stl | stl |
Bolt_Front_Alignment_Outside_Depth_Guide.stl | stl |
Bolt_Front_Alignment_Depth_Guide.stl | stl |
Bolt_Firing_Pin_Drill Depth_Guide.stl | stl |
Bolt_Cutting_Guide_Sleeve_No_Drill.stl | stl |
Bolt_Cutting_Guide_Sleeve.stl | stl |
Bolt_Carrier_Tube_Cutting_Guide.stl | stl |
Bolt_Alignment_Depth_Guide_Right_Side.stl | stl |
Bolt_Alignment_Depth_Guide_Left_Side.stl | stl |
Version: 1.0.0 latest
First generation of parts.
Before the most recent release of the Prof. Parabellum DIY AR9, I went through and made printable guides to cut the steel parts for the upper assembly. This includes the Upper Receiver Sleeve, Bolt Carrier Tube, and the Bolt.
You can print them out, put them over each metal section and they should give you easy to mark cutting guides so you're not having to eyeball it. The bolt section has many parts to test depths and hole locations, as it should.
Hope this helps everyone.
-Boost the Signal
6.2K
1.2K
Professor Parabellum DIY AR9 Semi-Automatic 9mm Carbine
Apr 14, 2022
3D Printer
United States
English
No license
QmTkmGRgUg64tub3yM6svkGYCY2P1XMFbX5ZB3Ft44AQWX
File | Extension |
---|---|
Upper_Receiver_Sleeve_Cutting_Guide.stl | stl |
Bolt_Front_Alignment_Outside_Depth_Guide.stl | stl |
Bolt_Front_Alignment_Depth_Guide.stl | stl |
Bolt_Firing_Pin_Drill Depth_Guide.stl | stl |
Bolt_Cutting_Guide_Sleeve_No_Drill.stl | stl |
Bolt_Cutting_Guide_Sleeve.stl | stl |
Bolt_Carrier_Tube_Cutting_Guide.stl | stl |
Bolt_Alignment_Depth_Guide_Right_Side.stl | stl |
Bolt_Alignment_Depth_Guide_Left_Side.stl | stl |
Version: 1.0.0 latest
First generation of parts.
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.