DYNAMIC DONG M-Lok Flat Mount AFGs: Laffs Dynamics
Variants of the original Dynamic Dong M-Lok AFGs, designed for mounting on flat faced / non rounded handguards.
Comes in two variants, both with two sub variants:
* Dong Dangler
- Ribbed Dangler
* Lil Silly
- Ribbed Silly
You can figure out which one's are longer :D
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .14mm+
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 28%+
Support Material Percentage: 18%
Print the dong upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Developer's Notes:
*During the original development of the Dynamic Dong, the model variants were actually called the Hung 'n Slung, and the Chode; instead of their released "family friendly" designations.
*I was giggled at when I originally asked around for ppl's AK dong dims, so I had Chairmanwon do it for me. Not surprisingly, ppl straight up gave him the data needed.
File | Extension |
---|---|
Dynamic Dong M-Lok Flat Mount.zip | zip |
Version: 1.0.0 latest
Initial release
DYNAMIC DONG M-Lok Flat Mount AFGs: Laffs Dynamics
Variants of the original Dynamic Dong M-Lok AFGs, designed for mounting on flat faced / non rounded handguards.
Comes in two variants, both with two sub variants:
* Dong Dangler
- Ribbed Dangler
* Lil Silly
- Ribbed Silly
You can figure out which one's are longer :D
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .14mm+
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 28%+
Support Material Percentage: 18%
Print the dong upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Developer's Notes:
*During the original development of the Dynamic Dong, the model variants were actually called the Hung 'n Slung, and the Chode; instead of their released "family friendly" designations.
*I was giggled at when I originally asked around for ppl's AK dong dims, so I had Chairmanwon do it for me. Not surprisingly, ppl straight up gave him the data needed.
1.7K
186
Oct 13, 2022
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
Dynamic Dong M-Lok Flat Mount.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.