DYNAMIC DONG M-Lok Foregrips: FFFTech/FFFTechnology A foregrip that mimics the PM md. 63's unique forward-pointing front handgrip, known to many as the "Dong" grip. This design is created to mount to M-Lok, essentially allowing attachment to any compatible forend on AKs; and any other weapons with M-Lok slotted forends. The main benefit of this design is one can have a "dong" grip with the ability to mount it further forward on an AK, allowing easier insertion of 30+ round mags without the issue of slamming the bottom of the mag into the foregrip, such is the problem with original Romanian "dong" foregrips. Comes in two variants, both with two sub variants: * Dong Dangler - Ribbed Dangler * Lil Silly - Ribbed Silly You can figure out which one's are longer :D Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 55C First Layer Print Height: .18mm Standard Layer Height: .14mm Wall Thickness: .40 Wall Perimeters: 4 - 5 Infill: 28% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 30% Print the dong upside down. Hardware Required: 2x M5x10 Hex Socketed Machine Screw/Bolt 2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
File | Extension |
---|---|
Dynamic Dong M-Lok Foregrips V1.0.1.zip | zip |
Version: DYNAMIC DONG M-Lok AFGs V1.0.1 latest
DYNAMIC DONG M-Lok AFGs V1.0.1: Laffs Dynamics
An angled foregrip that mimics the PM md. 63's unique forward-pointing front handgrip, known to many as the "Dong" grip.
This design is created to mount to M-Lok, essentially allowing attachment to any compatible forend on AKs; and any other weapons with M-Lok slotted forends. The main benefit of this design is one can have a "dong" grip with the ability to mount it further forward on an AK, allowing easier insertion of 30+ round mags without the issue of slamming the bottom of the mag into the foregrip, such is the problem with original Romanian "dong" foregrips.
Comes in two variants, both with two sub variants:
* Dong Dangler
- Ribbed Dangler
* Lil Silly
- Ribbed Silly
You can figure out which one's are longer :D
Update V1.0.1: Added information stating this design is specifically an angled foregrip.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 55C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 28%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 30%
Print the dong upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Version: 1.0.0
DYNAMIC DONG M-Lok Foregrips: FFFTech/FFFTechnology A foregrip that mimics the PM md. 63's unique forward-pointing front handgrip, known to many as the "Dong" grip. This design is created to mount to M-Lok, essentially allowing attachment to any compatible forend on AKs; and any other weapons with M-Lok slotted forends. The main benefit of this design is one can have a "dong" grip with the ability to mount it further forward on an AK, allowing easier insertion of 30+ round mags without the issue of slamming the bottom of the mag into the foregrip, such is the problem with original Romanian "dong" foregrips. Comes in two variants, both with two sub variants: * Dong Dangler - Ribbed Dangler * Lil Silly - Ribbed Silly You can figure out which one's are longer :D Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 55C First Layer Print Height: .18mm Standard Layer Height: .14mm Wall Thickness: .40 Wall Perimeters: 4 - 5 Infill: 28% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 30% Print the dong upside down. Hardware Required: 2x M5x10 Hex Socketed Machine Screw/Bolt 2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
5.1K
456
File | Extension |
---|---|
Dynamic Dong M-Lok Foregrips V1.0.1.zip | zip |
Version: DYNAMIC DONG M-Lok AFGs V1.0.1 latest
DYNAMIC DONG M-Lok AFGs V1.0.1: Laffs Dynamics
An angled foregrip that mimics the PM md. 63's unique forward-pointing front handgrip, known to many as the "Dong" grip.
This design is created to mount to M-Lok, essentially allowing attachment to any compatible forend on AKs; and any other weapons with M-Lok slotted forends. The main benefit of this design is one can have a "dong" grip with the ability to mount it further forward on an AK, allowing easier insertion of 30+ round mags without the issue of slamming the bottom of the mag into the foregrip, such is the problem with original Romanian "dong" foregrips.
Comes in two variants, both with two sub variants:
* Dong Dangler
- Ribbed Dangler
* Lil Silly
- Ribbed Silly
You can figure out which one's are longer :D
Update V1.0.1: Added information stating this design is specifically an angled foregrip.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 55C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 28%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 30%
Print the dong upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.